Glossary

2W

2-Wire; is used in the field of network technology for serial full duplex operation.

A/B Update

An A/B update uses two partitions (one active and one inactive partition). During the update, the system will be installed on the inactive partition. If an error occurs during the update, you can switch back to the old working partition.

Application

The application is the intended use of the KEB product.

Autonegotiation

Procedure for determining the max. transmission speed.

CAN®

Serial bus system running protocols such as CANopen, Devicenet or J1939. CAN is a registered trademark of the CAN in AUTOMATION - International Users and Manufactures Group e.V.

COMBIVERT

Proper name for a KEB Drive Controller.

Customer

The customer has purchased a product from KEB and integrates the KEB product into his product (customer product) or resells the KEB product (reseller).

eFuse

Very fast electronically programmable fuse.

eMMC

Embedded Multi Media Card consisting of flash memory and memory controller.

EN 60529

Degrees of protection provided by enclosures (IP-Code).

EN 61131-2

Programmable controllers - Part 2: Equipment requirements and tests. German version VDE 0411-500.

EN IEC 61010-2-201

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2: Particular requirements for control equipment. German version VDE 0411-2-201.

EN 60715

Dimensions of low-voltage switchgear and controlgear -Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations. German version VDE 0660-520.

EtherCAT®

EtherCAT

EtherCAT is a real-time Ethernet bus system. EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.

Ethernet

Real-time bus system - defines protocols, plugs, types of cables

HD 60364-4-41

Electrical installations of buildings Part 4-41 Protection for safety; Protection against electric shock. German version VDE 0100-410.

HD 60364-5-54

Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements, protective conductors and protective bonding conductors. German version VDE 0100-540.

HMI

Human-Machine-Interface describes a visual user interface (touchscreen).

IDE

Integrated Development Environment

IEC 61131-3

Programmable controllers - Part 3: Programming languages (German version DIN EN 61131-3)

NHN

Standard altitude zero; related to the established height definition in Germany (DHHN2016). The international data usually deviate from this by only a few cm to dm, so that the value is given can be taken from the regionally applicable definition.

PELV

Safe protective extra-low voltage (earthed).

RS485

RS-485 is an industry standard according to EIA-485 for a physical interface for asynchronous, serial data transmission.

RTC

Real Time Clock

SELV

Safe extra-low voltage (unearthed).

UPS

Uninterruptible power supply for bridging power failures or to bring the device into a defined state.