Assembly

Before installation, observe the following notes on the installation location:

Avoid locations exposed to direct sunlight for long periods of time (overheating of the device).

The device is not intended for installation in contact with corrosive chemical compounds.

Check whether the used bracket is suitable for the intended installation location.

 

To achieve protection class IP67, please note:

Use connection cable 00C6FX1-Cxxx.

Maximum deviation from the flat surface to the cutout ≤ 0.5 mm.

Material thickness of the mounting plate 1.5...3 mm.

Roughness of the surface where the seal is in contact ≤120 µm.

 

Monitor mounting
Monitor mounting

D

Max. 3 mm with cable 00C6FX1-Cxxx (IP67).

Max. 10 mm with standard Ethernet cable.

�

Tightening torque: 10 Nm (88 lbin) for nut (2); 1.3 Nm (11 lbin) for screws (3);