Start-up

System Settings Panel

Connect the panel to PoE (network access not required).

Panel boots into the X1 settings.

Access with admin / admin (must be changed).
Adjust network settings if necessary.

When booting the panel with TAP-TAP (tap on the display), an intermediate screen appears showing the current IP address <ip> of the panel! Then proceed to "System Settings".

As soon as the panel is available on the network, it can be accessed from a PC using a browser (recommended: Chrome, Chromium or Edge).

NOA Core

Managing apps and their configuration.

NOTICE! Ensure that the PC and the panel are on the same network.

Access is via <IP address of the panel>:8515 (e.g. http://10.120.104.52:8515).

The connections are unsecured (http without s), i.e. they must be accepted in the browser before you can access the actual website.

Helio

Access the HMI development environment via a tile or directly via <IP address of the panel>;:8512 (e.g. http://10.120.104.52:8512).