Glossary
COMBIVERT
Proper name for a KEB Drive Controller.
DIN EN IEC 60068-2-78
Environmental influences - Part 2-78: Test procedure – Cab test: Damp heat, constant (international version IEC 60068-2-78:2025).
DIN EN IEC 62368-1
Equipment for audio/video, information and communications technology – Part 1: Safety requirements.
EN 55024
Information technology equipment – Immunity characteristics – Limits and test methods. International Standard IEC/CISPR 24.
EN 60068-2-1
Environmental influences - Part 2-1: Test method - Test A: Cold. German version VDE 0468-2-1.
EN 60068-2-27
Environmental influences - Part 2-27: Test method - Test Ea and guideline: Shock. German version VDE 0468-2-27
EN 60068-2-6
Environmental influences - Part 2-6: Test method - Test Fc: Oscillation (sinusoidal). German version VDE 0468-2-6.
EN 60204-1
Safety of machinery - Electrical equipment of machines - Part 1: General requirements (VDE 0113-1, IEC 44/709/CDV).
EN 60529
Degrees of protection provided by enclosures (IP-Code).
EN 61131-2
Programmable controllers - Part 2: Equipment requirements and tests. German version VDE 0411-500.
EN IEC 61010-2-201
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2: Particular requirements for control equipment. German version VDE 0411-2-201.
EN 60715
Dimensions of low-voltage switchgear and controlgear -Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations. German version VDE 0660-520.
EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements.
EtherCAT®
EtherCAT is a real-time Ethernet bus system. EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
Functional earth
Functional earth is used exclusively to dissipate interferences. It offers no contact protection for persons.
PELV
Safe protective extra-low voltage (earthed).
RTC
Real Time Clock
UPS
Uninterruptible power supply for bridging power failures or to bring the device into a defined state.