Ethernet port (X1)
The two RJ45 sockets for Ethernet ports (X1, X2) support 10/100/1000/2500 Mbit Ethernet. Each RJ45 Ethernet port has two LEDs that indicate speed and activity.
RJ45 (socket) X1/X2 | PIN | Signal name |
|---|---|---|
1 | BI_D1+ | |
2 | BI_D1- | |
3 | BI_D2+ | |
4 | BI_D3+ | |
5 | BI_D3- | |
6 | BI_D2- | |
7 | BI_D4+ | |
8 | BI_D4- |
LED connection status (left) | LED speed (right) | ||
|---|---|---|---|
Off | Connection lost | Off | 10/100 Mbit/s connection established |
Yellow on blinking | Connection established and active | Orange | 1000 Mbit/s connection established |
Yellow | Connection established, but no activity | Green | 2.5 Gbit/s connection established |
Signal | Description |
|---|---|
BI_D1+ / BI_D1- | In MDI mode, this is the first pair in 2.5GBase-T and 1000Base-T, i.e. the BI_DA+/- pair, and it is the transmit pair in 10Base-T and 100Base-TX. In MDI crossover mode, this pair functions as a BI_DB+/- pair and acts as the receiving pair in 10Base-T and 100Base-TX. |
Signal | Description |
|---|---|
BI_D2+ / BI_D2- | In MDI mode, this is the first pair in 2.5GBase-T and 1000Base-T, i.e. the BI_DA+/- pair, and it is the transmit pair in 10Base-T and 100Base-TX. Im MDI-Crossover-Modus fungiert dieses Paar als BI_DA+/-Paar und ist das Sendepaar in 10Base-T und 100Base-TX. |
BI_D3+ / BI_D3- | In MDI mode, this is the third pair in 2.5GBase-T and 1000Base-T, i.e. the BI_DC+/- pair. In MDI crossover mode, this pair functions as a BI_DD+/- pair. |
BI_D4+ / BI_D4- | In MDI mode, this is the fourth pair in 2.5GBase-T and 1000Base-T, i.e. the BI_DD+/- pair. In MDI crossover mode, this pair functions as a BI_DD+/- pair. |
| To achieve the specified performance of the Ethernet port, Category 5 twisted-pair cables must be used for 10/100 MByte networks, and Category 5E, 6 or 6E cables for 1 Gbit/2.5 Gbit LAN networks. |
| The product is only connected to internal Ethernet networks without leaving the system and being exposed to TNVs. |
