Data cleaning
Data erasure is the process of permanently deleting or destroying sensitive data on the product’s storage devices in order to prevent unauthorised access to business-critical data and/or confidential/protected data stored on those storage devices.
When developing a system, the user must plan for data cleansing and incorporate storage devices that are easier to cleanse, as well as storage devices from manufacturers that offer an effective data erasure tool or a command to reset the device to its factory settings.
When carrying out data erasure, the user must consider whether the product’s storage devices contain sensitive data and draw up a data erasure plan to delete all sensitive data in accordance with national, regional or local regulations and requirements regarding data erasure, or as part of your waste disposal and decommissioning policies.
Users are responsible for erasing sensitive data from storage devices in accordance with national, regional or local regulations and requirements regarding data erasure, or as part of their disposal and decommissioning policies. |
Remove all removable storage devices and delete any sensitive data before reusing them, using the following methods:
|
In the event of the physical destruction of the storage device:
|
KEB recommends data erasure if the product is to be reused in a different user environment, sent in for repair, disposed of or taken out of service.
General guidelines for data erasure on storage devices containing business-critical and/or confidential/protected data:
- Before switching off, check whether power is required to clear the data on the product’s storage devices.
- If the device is disconnected from the mains, remove all removable storage devices from the product and delete any sensitive data.
- Volatile storage devices store data only temporarily. Data stored on volatile memory can be easily erased by cutting off the power supply or removing the battery for around 24 hours.
- Non-volatile storage devices store data permanently and retain information even after being disconnected from the power supply. Data stored on non-volatile storage media must be actively erased using one of the following methods:
- Use a certified third-party software tool that provides an audit trail and is capable of performing a full data clean-up, including areas such as hidden data and faulty blocks that standard service-based utilities cannot access.
- Use physical destruction methods for storage devices that cannot be securely erased using software. The aim of the destruction is to break the silicon chip inside the chip package into two or more pieces in order to prevent data from being read from the chip. The fragments should be no longer than 6 mm. If this service is carried out by a third party, ask them to issue you with certificates of destruction as confirmation.
- Use the manufacturer’s data erasure tool to wipe the device, or reset it to its factory settings (if this option is provided by the manufacturer). The manufacturers’ tools and commands have been developed to meet the manufacturers’ data cleansing requirements for their specific storage devices.
- Always check that all sensitive data has been effectively redacted.