EtherCAT connection (X2)

EtherCAT Specification

Connection

Description

EtherCAT port (X1)

  • Automatic crossover function and switching between RX and TX.
  • Power input max. 2.15 W (at 3.3 V/650 mA)
  • Implements the CIFX M3042100BM-RE/F (M.2 3042 Key B module)
  • EtherCAT RJ45 connectors must only be used for LAN. It cannot be used for telecommunications.

 

Pin configuration of the EtherCAT port

RJ45 port (socket)

PIN

Signal name

Description

1

TX+

Data transmission + channel

2

TX-

Send data – Channel

3

RX+

Receive data + channel

4

Term 1

Bypassed and terminated via an RC connection with PE

5

Term 1

6

RX-

Receive data + channel

7

Term 2

Bypassed and terminated via an RC connection with PE

8

Term 2

 

Left LED: Green connection

Right-hand LED: Yellow (active)

Off

No connection to the Ethernet

Off

The LED is not in use

Green

Connected to Ethernet, but does not send or receive frames

Green on blinking

Activity: Connected to the Ethernet and sends/receives Ethernet frames