Installation

DANGER

danger

Electrical voltage in the vicinity of the device!

Danger to life due to electric shock !

  1. This device is intended for installation in control cabinets or machines that can be operated under dangerous voltages. For any work on the device
  1. Switch off the supply voltage of the control cabinet or machine.
  2. Secure it against switching on.
  3. Wait until all drives has been stopped in order that no regenerative energy can be generated.
  4. Never bridge upstream protective devices. Also not for test purposes.

NOTICE

notice

Use of suitable voltage sources!

Electric Shock!

  1. Only voltage sources with safe safe extra-low voltage in accordance with HD 60364-4-41 may be used.
  2. Ensure that the used voltage supplies have the appropriate overvoltage category for the application.
  3. The requirements listed for SELV and PELV circuits in HD 60364-4-41 must be complied with.
  4. With existing or newly-wired circuits the person installing the device or machine must ensure that the PELV requirements are met.
  5. Connections with higher voltages must be excluded.