Digital twins for COMBIVERT F6 and S6

Develop, test and commission virtually

Use the original firmware for the COMBIVERT F6 and S6 drives in virtual development, test and simulation environments. The firmware simulation models precisely replicate the behaviour of real drives, enabling drive functions, parameterisations and control strategies to be developed, tested and validated even before physical hardware is available.

Whether it’s the virtual commissioning of complete machines, the development of customised drive concepts or the optimisation of control and motion sequences: the simulation models support the entire engineering process, from the initial idea through to actual commissioning. This helps to shorten development times, reduce risks and validate machine functions at an early stage. At the same time, they lay the foundation for powerful digital twins that support the entire machine lifecycle.

Benefits at a glance

  • Shorter development times 
    Develop and test drive functions in parallel with the design process.
  • Early fault detection
    Identify integration, communication and control faults as early as the simulation phase.
  • Faster commissioning
    Validated parameters and tested sequences are available even before the machine is assembled.
  • Implement use cases more quickly 
    Assign machine scenarios specifically to the appropriate drive controller functions and accelerate development and testing.
  • Fewer project risks 
    Reduce costly iterations and avoid surprises during commissioning.
  • Realistic results 
    The models are based on the original firmware of the COMBIVERT F6 and S6 drives.
  • Reproducible tests
    Simulations can be repeated and run automatically at any time.

Typical areas of application

Mechanical and plant engineering

Virtual commissioning and validation of machine functions as early as the development stage.

Research and development

Simulation of new machine concepts, drive strategies and control methods.

Training and demonstration

Realistic training environments without physical machines or drives.

Original firmware rather than a simplified model

The key difference lies in the details: the KEB firmware simulation models use the same firmware that runs on the actual COMBIVERT F6 or S6 drive. As a result, the parameterisation, functionality and behaviour of the virtual and real systems are largely identical.

Existing expertise can be utilised as is. Parameterisation is carried out using the familiar KEB engineering tool COMBIVIS, creating a consistent development environment. 
 

Advantages

  • Realistic drive behaviour
  • Identical parameter structures
  • Consistent engineering workflow
  • Easy transferability to real systems
  • Highly informative simulation results

     

Technology behind the digital twins

KEB Digital Twins are based on firmware simulation models of the COMBIVERT F6 and S6 drive technology. By executing the original firmware within the simulation environment, a virtual replica of the real drive is created that closely mirrors its actual function and behaviour.

Two simulation and modelling platforms. One firmware.

Depending on the application, KEB Digital Twins are available for different simulation environments.

Development and analysis with MATLAB® & Simulink®

For development departments and simulation experts, the KEB simulation models can be integrated directly into MATLAB® & Simulink®. They are currently available for the COMBIVERT F6 and S6, in the APPLICATION and PRO variants.

The models are provided as Simulink simulation blocks (S-Functions) and can be combined with your own motor, load and machine models.

Typical applications

  • Development of new control strategies
  • Analysis of system behaviour
  • Digital twin projects
  • Research and pre-development
  • Model-based development
  • Optimisation of machine movements
     

Advantages

  • Flexible simulation environment
  • Integration of customer-specific models
  • No additional hardware required
  • Rapid testing and development cycles
  • High level of realism thanks to original firmware

Would you like to carry out a virtual commissioning with KEB?

Try our S-Functions for COMBIVERT F6 and S6 free of charge for 5 days or request a quote directly.

Our experts will help you select the right simulation model and integrate it into your development environment.

Your contact at KEB Automation
Tobias Wenneker
Product Manager Drives

Request models now

Virtual commissioning with ISG-virtuos

ISG-virtuos enables complete machine and plant models to be set up and commissioned virtually.

The KEB firmware runs as a virtual drive within the simulation environment and interacts with PLCs, motion control systems and machine models just as it would in actual operation.

Typical applications

  • Virtual commissioning
  • PLC validation
  • Motion control tests
  • Fieldbus and EtherCAT tests
  • Integration testing prior to hardware availability
  • Machine optimisation

 

Benefits

  • Early validation of complex machine functions
  • Reduced on-site commissioning time
  • Repeatable test environments
  • Reduced commissioning risks
  • Faster project completion

 

You’ll find the models at TwinStore:

Download now

 

Video, Webinars
KEB Automation provides firmware simulation models of the COMBIVERT drive controllers, which can reduce the time for commissioning by up to 90 percent.
Tobias Wenneker | 05.12.2023
News
Via the TwinStore, users can download KEB simulation models directly. This can reduce commissioning time by up to 90 percent.
Tim Schöllmann | 16.07.2023