Digital twins for COMBIVERT F6 and S6
Develop, test and commission virtually
Use the original firmware for the COMBIVERT F6 and S6 drives in virtual development, test and simulation environments. The firmware simulation models precisely replicate the behaviour of real drives, enabling drive functions, parameterisations and control strategies to be developed, tested and validated even before physical hardware is available.
Whether it’s the virtual commissioning of complete machines, the development of customised drive concepts or the optimisation of control and motion sequences: the simulation models support the entire engineering process, from the initial idea through to actual commissioning. This helps to shorten development times, reduce risks and validate machine functions at an early stage. At the same time, they lay the foundation for powerful digital twins that support the entire machine lifecycle.
Benefits at a glance
- Shorter development times
Develop and test drive functions in parallel with the design process. - Early fault detection
Identify integration, communication and control faults as early as the simulation phase. - Faster commissioning
Validated parameters and tested sequences are available even before the machine is assembled. - Implement use cases more quickly
Assign machine scenarios specifically to the appropriate drive controller functions and accelerate development and testing. - Fewer project risks
Reduce costly iterations and avoid surprises during commissioning. - Realistic results
The models are based on the original firmware of the COMBIVERT F6 and S6 drives. - Reproducible tests
Simulations can be repeated and run automatically at any time.
Typical areas of application
Mechanical and plant engineering
Virtual commissioning and validation of machine functions as early as the development stage.
Research and development
Simulation of new machine concepts, drive strategies and control methods.
Training and demonstration
Realistic training environments without physical machines or drives.
Original firmware rather than a simplified model
The key difference lies in the details: the KEB firmware simulation models use the same firmware that runs on the actual COMBIVERT F6 or S6 drive. As a result, the parameterisation, functionality and behaviour of the virtual and real systems are largely identical.
Existing expertise can be utilised as is. Parameterisation is carried out using the familiar KEB engineering tool COMBIVIS, creating a consistent development environment.
Advantages
- Realistic drive behaviour
- Identical parameter structures
- Consistent engineering workflow
- Easy transferability to real systems
Highly informative simulation results
Technology behind the digital twins
KEB Digital Twins are based on firmware simulation models of the COMBIVERT F6 and S6 drive technology. By executing the original firmware within the simulation environment, a virtual replica of the real drive is created that closely mirrors its actual function and behaviour.
Two simulation and modelling platforms. One firmware.
Depending on the application, KEB Digital Twins are available for different simulation environments.
Development and analysis with MATLAB® & Simulink®
For development departments and simulation experts, the KEB simulation models can be integrated directly into MATLAB® & Simulink®. They are currently available for the COMBIVERT F6 and S6, in the APPLICATION and PRO variants.
The models are provided as Simulink simulation blocks (S-Functions) and can be combined with your own motor, load and machine models.
Typical applications
- Development of new control strategies
- Analysis of system behaviour
- Digital twin projects
- Research and pre-development
- Model-based development
- Optimisation of machine movements
Advantages
- Flexible simulation environment
- Integration of customer-specific models
- No additional hardware required
- Rapid testing and development cycles
- High level of realism thanks to original firmware
Virtual commissioning with ISG-virtuos
ISG-virtuos enables complete machine and plant models to be set up and commissioned virtually.
The KEB firmware runs as a virtual drive within the simulation environment and interacts with PLCs, motion control systems and machine models just as it would in actual operation.
Typical applications
- Virtual commissioning
- PLC validation
- Motion control tests
- Fieldbus and EtherCAT tests
- Integration testing prior to hardware availability
- Machine optimisation
Benefits
- Early validation of complex machine functions
- Reduced on-site commissioning time
- Repeatable test environments
- Reduced commissioning risks
- Faster project completion
You’ll find the models at TwinStore:






