The new S1 high-performance holding brake impresses with a new, patented friction system. This results in a significantly higher braking torque compared to conventional spring-applied brakes. This is particularly suitable for servo applications with increased safety requirements. Thanks to the plug & play system, this series is also easy to assemble.
The high-performance brake has a torque range of 0.25 Nm to 60 Nm.
- 9 sizes
- High permissible emergency stop friction energy
- Stable brake torque
- High temperature resistance
- Ready to install, adjusted air gap
- Used as a service brake or holding brake
- Integrated cable slots
- Up to Iso class H in accordance with VDE 0580
- Standard voltage 24V
To protect the COMBISTOP S1, and therefore the braking torque, against oil leaking from adjacent bearings, it can be optionally equipped with a felt ring.
The COMBISTOP 28 is available in a CCV design (Cold Climate Version) for use in particularly harsh and cold environments. Temperatures as low as -40 °C are therefore no problem for the brake.
If the braking torque needs to be modified for the application, the torque can be increased or reduced according to the customer’s specifications during the internal production process.
If the application requires a modified voltage, a customised coil with the corresponding voltage can be realised in the internal production process.
If the assembly process of the brake has to be simplified, our products can be equipped with ready-to-connect cables with plugs, contacts or even wire end ferrules.
A factory certificate 2.1 according to DIN EN 10204 that the delivered products comply with the agreements at the time of order can be provided at the customer's request. This certificate is issued based on non-specific testing. Also, an acceptance test certificate 3.1 according to DIN EN 10204 can be issued at the customer's request. In this case, the confirmation is given with the results of specific tests, such as the torque test.
|Size||Rated torque M2 [Nm]||Min. static torque at 120 °C M4min120[Nm]||Standard power [W]||Bore [mm]||max. Hub bore [mm]|
Standard voltage: 24 V | Special voltage: on request
When it comes to servo motors, speed, reliability and flexibility are of the essence. KEB meets these and other requirements with customised solutions. Customers benefit from a servo drive that always stays safely in motion.
Precision, safety and repeatability are essential in medical technology. This requires solutions that are as reliably produced as the work in the healthcare industry demands. With know-how and established products, KEB has been meeting the high demands in medical technology for decades.
In robotics, compactness, repeatability and positioning accuracy are important. Our products meet these criteria precisely and are characterised by their high quality and flexibility. Standard and customised solutions are used by robotics customers all over the world.
Individual solutions, speed and safety are standard for industrial trucks, automated guided vehicles and wheel hub drives. Products from KEB can be individually tailored to the vehicles in intralogistics. Thanks to the many years of experience of the employees, the optimum for the application is brought out together with the customer.
With innovative solutions, KEB enables the electronic operation of auxiliary systems in commercial vehicles and mobile machinery, thereby reducing emissions.