Training

FROM EXPERT TO EXPERT

User-oriented training courses have been an integral part of KEB's range of services for a long time. Whether at your site, online or at KEB's central locations: we offer technical, user-oriented training on a variety of topics. With your interests and individual requirements in focus, you benefit from the competent advice of our training team and a knowledge transfer at eye level.

TRAINING OFFERS

DRIVE ELECTRONICS

Our drive controllers combine the functions of traditional frequency inverters with those of dynamic servo controllers. Whether it’s a matter of positioning, speed or torque control, get to know the features of our drive electronics better, or gain a deeper insight into the possibilities offered by our drive controllers. During the drive electronics training course at KEB’s Barntrup or Heilbronn sites, you will be given the precise practical knowledge that you need.

Drive electronics training

CONTROL TECHNOLOGY

Create flexible automation solutions for use in numerous fields of application with KEB’s control technology. Training courses geared to your existing knowledge provide you with practical know-how at KEB’s Barntrup or Heilbronn sites. This allows you to get the most out of KEB’s innovative hardware and software solutions in the area of control technology.

Control technology training

Online Training

No travel to the training location, therefore no travel or accommodation expenses. Online training courses are an attractive alternative to classroom teaching from both a financial and an ecological perspective. In the online training sessions, theoretical content is presented and you are given the opportunity to try out practical exercises on training models. The trainer and trainees can interact with each other and apply everything they have learned in theory directly in practical exercises.

Go to our online seminars

DRIVE ELECTRONICS

On Request

X1“Three-phase drives with COMBIVERT F6/S6 drive controllers and COMBIVIS 6”

Equipment training for beginners, Course 1

Topics:

  • Basics AC drives
  • Basics frequency inverters
  • V/F controlled drives
  • Setting up communication with COMBIVIS 6
  • Program structure
  • Operation and adjustment of the units
  • Data backup/data transfer
  • Error diagnosis COMBIVIS 6
  • Practical exercises

Appointments on request

to registration

On Request

X2A„Single Axis Drive COMBIVERT F6/S6 Commissioning“

Equipment Training, Course 2A

Topics:

  • Hardware and connection
  • Types of control cards
  • Start-up wizards
  • Functional range
  • Commissioning of controlled drives
  • Operating modes concerning CiA 402
  • Analysis options with KEB Scope
  • Error diagnosis
  • Practical exercises

Appointments on request

to registration

On Request

X2B”Single Axis Drive COMBIVERT S6/F6”

Advanced equipment training, Course 2B

Topics:

  • Operating modes concerning CiA 402 (IEC 61800-7-200)
    • Velocity Mode
    • Homing Mode
    • Profile Position Mode
    • Cyclic Synchronous Velocity Mode
    • Cyclic Synchronous Position Mode
  • COMBIVIS 6 start-up wizards
  • Recipes
  • Error diagnosis
  • Practical exercises

Appointments on request

to registration

On Request

X3“Safety Module for KEB COMBIVERT F6 and S6”

Practical Training, Course 3

Topics:

  • Functionality of the devices
  • Safety functions regarding EN 61800-5-2
  • Safety editor in COMBIVIS 6
  • Fault diagnosis
  • Practical exercises

Appointments on request

to registration

On Request

"COMBIVERT G6 and COMBIVIS 6"

Practical Training, Course 4

Topics:

  • Basics frequency inverters
  • Connection and taking units into operation
  • Operation surfaces
  • PC-operation surface COMBIVIS 6
  • Function extent of the units
  • Operating mode u/f and sensorless control (ASCL/SCL)
  • Error diagnosis
  • Accessories
  • Practical exercises

to registration

On Request

X5Customer specific training

If required we also arrange training sessions in accordance to your needs. To ensure a problem free organization of the training, please discuss the following points with us at an early stage:

  • Place of training
  • Time frame of the training
  • Number of participants
  • Knowledge of the participants
  • Topics

The fee for special training at KEB is EURO 1.300 per day + VAT. 
For training sessions at your company the charge for arrival, departure and accommodation of the instructor has to be added.
The availability of a suitable room with screen and blackboard is preassumed. Furthermore one PC/notebook for each two participants should be available for practical exercises.

to registratrion

On Request

X5Customer specific training

If required we also arrange training sessions in accordance to your needs. To ensure a problem free organization of the training, please discuss the following points with us at an early stage:

  • Place of training
  • Time frame of the training
  • Number of participants
  • Knowledge of the participants
  • Topics

The fee for special training at KEB is EURO 1.300 per day + VAT. 
For training sessions at your company the charge for arrival, departure and accommodation of the instructor has to be added.
The availability of a suitable room with screen and blackboard is preassumed. Furthermore one PC/notebook for each two participants should be available for practical exercises.

to registratrion

On Request

"COMBIVERT G6 and COMBIVIS 6"

Practical Training, Course 4

Topics:

  • Basics frequency inverters
  • Connection and taking units into operation
  • Operation surfaces
  • PC-operation surface COMBIVIS 6
  • Function extent of the units
  • Operating mode u/f and sensorless control (ASCL/SCL)
  • Error diagnosis
  • Accessories
  • Practical exercises

to registration

On Request

X3“Safety Module for KEB COMBIVERT F6 and S6”

Practical Training, Course 3

Topics:

  • Functionality of the devices
  • Safety functions regarding EN 61800-5-2
  • Safety editor in COMBIVIS 6
  • Fault diagnosis
  • Practical exercises

Appointments on request

to registration

On Request

X2B”Single Axis Drive COMBIVERT S6/F6”

Advanced equipment training, Course 2B

Topics:

  • Operating modes concerning CiA 402 (IEC 61800-7-200)
    • Velocity Mode
    • Homing Mode
    • Profile Position Mode
    • Cyclic Synchronous Velocity Mode
    • Cyclic Synchronous Position Mode
  • COMBIVIS 6 start-up wizards
  • Recipes
  • Error diagnosis
  • Practical exercises

Appointments on request

to registration

On Request

X2A„Single Axis Drive COMBIVERT F6/S6 Commissioning“

Equipment Training, Course 2A

Topics:

  • Hardware and connection
  • Types of control cards
  • Start-up wizards
  • Functional range
  • Commissioning of controlled drives
  • Operating modes concerning CiA 402
  • Analysis options with KEB Scope
  • Error diagnosis
  • Practical exercises

Appointments on request

to registration

On Request

X1“Three-phase drives with COMBIVERT F6/S6 drive controllers and COMBIVIS 6”

Equipment training for beginners, Course 1

Topics:

  • Basics AC drives
  • Basics frequency inverters
  • V/F controlled drives
  • Setting up communication with COMBIVIS 6
  • Program structure
  • Operation and adjustment of the units
  • Data backup/data transfer
  • Error diagnosis COMBIVIS 6
  • Practical exercises

Appointments on request

to registration

Your contact
Keb schulung team

KEB Automation Training

+49 5263 401-262
schulung-keb@keb.de

CONTROL AND AUTOMATION

On Request

COMBICONTROL C6 ADVANCED “COMBIVIS studio 6 CNC“

Practical Training, Course 13

Barntrup, Germany
Topics:
  • Basics of CONTROL PRO (Short repetition)
  • Basics of CNC
  • G-Code / Editor / Import
  • Cinematics (Gantry; Portal, Scara, Tripod)
  • Exercises and sample projects

to registration

On Request

COMBICONTROL C6 PRO “COMBIVIS studio 6 SOFTMOTION“

Practical Training, Course 12

Barntrup, Germany
Topics:
  • Basics of CONTROL PRO
    (drive configuration, basics, PLC_OPEN, KEB_SMC_UTILITY)
  • Single axis movement (Velocity mode, abs./rel. positioning)
  • Master/Slave-modes (phasing, caming, gearing)
  • Virtual drive, virtual master
  • Externer encoder
  • Exercises and sample projects

to registration

On Request

COMBICONTROL C6 BASIC “COMBIVIS studio 6 / COMBICONTROL C6“

Practical training, Course 11

Barntrup, Germany
Topics:
  • Overview COMBICONTROL C6 automation system
    • IPC-based control
    • Embedded control
    • Systembus EtherCAT C6
    • IO-modules
    • Automation platform COMBIVIS studio 6
  • Attachment and device setup
  • Introduction in programming with COMBIVIS studio 6
    • Object orientated project organization (Applicationslayout / terms / objects)
    • Overview: Programing according to standard IEC 61131-3 (ST, FBD, SFC, CFC,LD, IL)
    • Declare / Compile / Login / Download / Debug / Monitor / Trace
    • Bus configuration (EtherCAT), drive Attachment F5, F6, H6, S6
    • Further interfaces on request
  • Exercises and sample projects

to registration

On Request

COMBICONTROL “SAFE PLC, SAFE I/O“

Software and practical Training, Course 16

Barntrup, Germany
Topics:
  • Functionality of the devices
  • Handling of safety programming in COMBIVIS
    • PLCopen safety function blocks
    • Communication with a CCOMBIVERT F6/S6 by FSoE
    • Automatically download of safe parameter lists
  • Fault diagnosis
  • Practical exercises

to registration

News
A system from KEB Automation makes it possible to bring together the worlds of CNC and PLC.
Tim Schöllmann | 29.04.2022
News
KEB Automation is starting into the anniversary year 2022. What began with a Brake is now a full-range Supplier for high-end Automation, from IIoT to Drive Technology to Motors.